manualshive.com logo in svg

Fujitsu Lifebook E330, Manual

The Fujitsu Lifebook E330 is an efficient and versatile laptop designed for modern professionals. Unlock its full potential by downloading the comprehensive user manual, available for free at manualshive.com. This manual ensures you make the most out of your device, empowering you with valuable insights and instructions.

Share
Download
background image

S e c t i o n   T h r e e

32

INTEGRATED POINTING DEVICE

Your LifeBook E Series will have either an inte-
grated ErgoTrac or a TouchPad pointing device.
Please refer to the section that describes your
pointing device.

Integrated ErgoTrac Pointing Device

The ErgoTrac pointing device is composed 
of a short, comfortable, dish-shaped pointing
device and two buttons located in front of the
keyboard. The ErgoTrac pointing device has 
the function of a mouse, and moves the cursor
around on the screen – up, down, left and right.
A light pressure with the tip of your finger is all
that is required to operate the ErgoTrac. The
more pressure you use the faster the cursor will
move. The second part of the ErgoTrac pointing
device – the buttons – function as mouse but-
tons, and the functions they perform depend 
on the application you are running. Figure 3-3
shows the position of the ErgoTrac pointing
device and buttons.

Figure 3-3 ErgoTrac Pointing Device

Right Button

Left Button

Cursor Control

P O I N T

You may have a TouchPad if your 
specified such in your Built-to-order
LifeBook configuration.

F Three Using.qxd  10/28/98  10:14 AM  Page 32

Summary of Contents for Lifebook E330



























































































































































































































Reviews:

No comments

Related manuals for Lifebook E330

Allview ALLBOOK H User Manual preview
ALLBOOK H
Brand: Allview Pages: 27
Dell Inspiron 120L Quick Reference Manual preview
Inspiron 120L
Brand: Dell Pages: 190
Dell G7 7790 Service Manual preview
G7 7790
Brand: Dell Pages: 101
Dell Latitude 3390 2-in-1 Owner'S Manual preview
Latitude 3390 2-in-1
Brand: Dell Pages: 90
Samsung Chromebook XE303C12-A01US Specifications preview
Chromebook XE303C12-A01US
Brand: Samsung Pages: 4
Samsung ATIV Book2 270E5V User Manual preview
ATIV Book2 270E5V
Brand: Samsung Pages: 31
Samsung 520U4X User Manual preview
520U4X
Brand: Samsung Pages: 25
Samsung 62230ANH User Manual preview
62230ANH
Brand: Samsung Pages: 39
Samsung 70G7C Service Manual preview
70G7C
Brand: Samsung Pages: 82
Samsung Ativ-Book2 User Manual preview
Ativ-Book2
Brand: Samsung Pages: 132
Samsung HABANA-C NT-R45 Series Service Manual preview
HABANA-C NT-R45 Series
Brand: Samsung Pages: 156
Samsung HABANA NP-P50 Series Service Manual preview
HABANA NP-P50 Series
Brand: Samsung Pages: 160
Samsung 6235ANH User Manual preview
6235ANH
Brand: Samsung Pages: 138
Samsung 700Z5C User Manual preview
700Z5C
Brand: Samsung Pages: 158
Samsung 600B4B User Manual preview
600B4B
Brand: Samsung Pages: 163
Samsung HABANA NP-P50 Series User Manual preview
HABANA NP-P50 Series
Brand: Samsung Pages: 341
Samsung 9 Series User Manual preview
9 Series
Brand: Samsung Pages: 321
Samsung Chromebook 303C12 Quick Start Manual preview
Chromebook 303C12
Brand: Samsung Pages: 36

Brands by name

Popular brands

Load more brands