manualshive.com logo in svg

Fujitsu Lifebook E330, Manual

The Fujitsu Lifebook E330 is an efficient and versatile laptop designed for modern professionals. Unlock its full potential by downloading the comprehensive user manual, available for free at manualshive.com. This manual ensures you make the most out of your device, empowering you with valuable insights and instructions.

Share
Download
background image

S e c t i o n   F i v e

140

EXTERNAL INSTALLATION 
OF A FLOPPY DISK DRIVE

To install a floppy disk drive externally,
you must mount the modular floppy disk drive
in the optional external adapter and attach the
external adapter to the connector on your
notebook.

To connect a floppy disk drive externally:

1. Close all files and exit all applications.

2. Turn off power to your notebook, close 

the display and remove the AC adapter.

(See pages 24-25 for more information.)

3. Mount the floppy disk drive in the external

adapter by aligning the connector ends and
pushing the drive into the external adapter
until it clicks into place.

4. Open the external floppy disk drive port

cover on the left side panel of your note-
book,

(see Figure 5-11)

, by gently pulling 

on the right side of the cover and then 
tilting it open.

5. Align the connector of the external floppy

disk drive adapter with the connector
towards the body of your notebook with the
wide side of the connector up.

(Figure 5-11)

6. Insert the connector of the external floppy

disk drive adapter firmly into the port on
your notebook until it clicks.

To disconnect an external floppy disk drive:

1. Close all files and exit all applications 

2. Turn off power to your notebook, close 

the display and remove the AC adapter.

(See pages 24-25 for more information.)

3. Squeeze together firmly on the release but-

tons on either side of the external floppy 
disk drive connector next to the body of
your notebook.

(Figure 5-11.)

4. Pull the connector free.

5. Close the floppy disk drive port cover on

your notebook and press it shut until 
it latches.

6. Remove the floppy disk drive from the 

external adapter.

Figure 5-11 External Installation of a Floppy Disk Drive.

External Floppy Disk
Drive Port

External Floppy Disk

Drive Connector Cover

Connector
Release Button

External Floppy 
Disk Drive

H Five UserInstallable.qxd  10/28/98  10:26 AM  Page 140

Summary of Contents for Lifebook E330



























































































































































































































Reviews:

No comments

Related manuals for Lifebook E330

Time Warner Cable SIERRA WIRELESS 250U 4G/3G LAPTOP CARD Quick Start Manual preview
SIERRA WIRELESS 250U 4G/3G LAPTOP CARD
Brand: Time Warner Cable Pages: 5
IBM ThinkPad R40 User Manual preview
ThinkPad R40
Brand: IBM Pages: 10
ECS TL10IE2 User Manual preview
TL10IE2
Brand: ECS Pages: 46
rgs Education Chromebook Getting Started Manual preview
Education Chromebook
Brand: rgs Pages: 12
Acer eMachines E720 Series Service Manual preview
eMachines E720 Series
Brand: Acer Pages: 214
Acer eMachines E730 Series Quick Manual preview
eMachines E730 Series
Brand: Acer Pages: 314
Acer Extensa 15 EX215 User Manual preview
Extensa 15 EX215
Brand: Acer Pages: 81
Acer Ferrari 4000 Guía Del Usuario preview
Ferrari 4000
Brand: Acer Pages: 64
Acer Ferrari 4000 Manual Do Utilizador preview
Ferrari 4000
Brand: Acer Pages: 64
Acer Aspire One N57DQBB Generic User Manual preview
Aspire One N57DQBB
Brand: Acer Pages: 1810
Acer A114-31 User Manual preview
A114-31
Brand: Acer Pages: 69
Fujitsu Lifebook S761 Operating Manual preview
Lifebook S761
Brand: Fujitsu Pages: 100
Hama 095828 Operating Instructions Manual preview
095828
Brand: Hama Pages: 22
Sony VAIO VGN-SZ390 CTO Series Specifications preview
VAIO VGN-SZ390 CTO Series
Brand: Sony Pages: 2
Sony VAIO VGN-SZ381P Specifications preview
VAIO VGN-SZ381P
Brand: Sony Pages: 2
Sony VAIO VGN-SZ340 Specifications preview
VAIO VGN-SZ340
Brand: Sony Pages: 2
Sony VAIO VGN-SZ360P Specifications preview
VAIO VGN-SZ360P
Brand: Sony Pages: 2
Sony VAIO VGN-SZ281P/X Specifications preview
VAIO VGN-SZ281P/X
Brand: Sony Pages: 2

Brands by name

Popular brands

Load more brands