background image

C o n f i g u r i n g   Y o u r   L i f e B o o k   E   S e r i e s

L i f e B o o k   E   S e r i e s   f r o m   F u j i t s u

111

Menu Field

Options

Default

Description

Auto Save to Disk:

Off; After 1 Hour.

[Off]

When set to

After 1 Hour 

your notebook will automatically 

save all of system memory and the operating parameters to the 
hard drive and go to the pseudo-off if you leave your notebook in
Suspend mode for an hour.

Resume On

On; Off.

[Off]

Sets whether or not to Resume from a suspension state when a

Modem Ring:

message is received by telephone line. This feature is not available
if the Save-to-Disk mode is enabled. This feature applies to internal,
external and PC Card modems.

Resume On Time:

On; Off.

[Off]

Sets whether or not to resume from a suspension state at a
designated time. This feature is available from either the Suspend
mode or the Save-to-Disk mode.

Resume Time:

Sets the designated time, on a 24-hour clock, when the notebook
is to automatically resume operation from the Suspend state.
The format of the clock setting is hours:minutes:seconds. Each
segment of the time is set separately, either by incrementing or by
typing in the numbers. You move between the segments with the

Tab

key or the 

Shift+Tab

keys. This only applies when Resume on

Time is set to On.

Four

Table 4-13 Fields, Options and Defaults for the Power Menu.

C A U T I O N

Wake on Modem ring when enabled will
draw power from the bridge battery alone
when your system is running off battery
power. This may potentially drain your
bridge battery. Disabling Wake on Modem
ring will prevent this from happening.

G Four Configuring.qxd  10/28/98  10:21 AM  Page 111

Summary of Contents for Lifebook E330



























































































































































































































Reviews: