41
SECTION 1
3.
Place a disc on the tray while holding the tray with a hand.
Fit the hole in the disc on the stopper at the center of the tray with the title-printed face up, and
push it down until it clicks into place. Failure to do so may make it impossible to play or eject the
CD.
4.
Push the tray gently into the drive.
It is about 10 seconds before the CD gets ready for use.
Projection
Tray
Tray
Critical Point
If the tray will not comes out
If the computer is turned off, turn it on, and then press the CD eject button.
You can press the eject button at any time, even when the
on the operating status indi-
cator LED blinks.
Critical Point
When inserting a disc, fit the hole in the disc on the stopper at the center of the tray to
prevent the disc from coming off and hitting against the computer main unit.
LB01_Brie (37-44)
17/10/02, 5:29 PM
41
