Fujitsu Laptop User Manual Download

Page: 10 / 128

Note: Modem setting in Windows 98 / Windows Me

The default modem setting in Windows 98 / Windows Me operating system is United States of
America. If you are residing in Australia or New Zealand, please choose the appropriate country
where you are located.

The Modem will only operate with Tone Dialing; Selection of Pulse dialing is not possible.

Please see below instruction for quick modem setup.

A. If you are located in Australia

Go to Control panel, select modem icon.

Choose Australia in “What country/region
are you in now?”

Select Phone system as “Tone Dialing”

B. If you are located in New Zealand

Go to Control panel, select modem icon.

Choose New Zealand in “What country/
region are you in now?”

Select Phone system as “Tone Dialing”

Note:

Please check with your local distributor for the availability of Win Me and Win 98SE support.

LB00_Brie (Intro)

17/10/02, 5:09 PM

Summary of Contents for Laptop

































































































































Search results

Summary of Contents for Laptop

Reviews:

Related manuals for Laptop

Brands by name

Popular brands

Fujitsu Laptop, User Manual

Search results

Summary of Contents for Laptop

Reviews:

Related manuals for Laptop

Brands by name

Popular brands