manualshive.com logo in svg

Fujitsu FI-5900C, Operator'S Manual

Share
Download
Fujitsu FI-5900C Operator'S Manual Download Page 137

117

4.4 Cleaning the Rollers (with a lint-free cloth)

4

DA
IL

Y

 C
A

R

E

11. Clean the Feed rollers (metal rollers, each set consists of 2 rollers, 9 

locations) on the upper side of the lower transport path using a lint-free 
cloth moistened with the cleaner F2.

Take care especially to remove black stains on the rollers, since such stains are deteriorating the 
feeding performance.

 

 

12. Clean the Pinch rollers (rubber rollers, each set consists of 2 rollers, 9 

locations) on the upper side of the upper transport path using a lint-free 
cloth moistened with the cleaner F1.

 

13. Close the ADF cover.

For details, refer to

 “2.3 Opening and Closing ADF” on page 12

.

If all the cleaning is done, reset the Cleaning counter by referring 

“5.2 How to check and reset 

the Consumable/Cleaning Counter” on page 125

.

ATTENTION

Do not use the cleaner F2 for any other parts. Use it only for cleaning the 
Feed rollers.      

Feed rollers

Pinch roller

Summary of Contents for FI-5900C


































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands