●
RA Port Performance Information
•
Send IOPS (the number of times data is transferred per second)
•
Receive IOPS (the number of times data is received per second)
•
Send Throughput (the amount of transferred data that is sent per second)
•
Receive Throughput (the amount of transferred data that is received per second)
●
Host-LU QoS Performance Information
•
Average IOPS (the average number of I/Os per second)
•
Minimum IOPS (the minimum number of I/Os per second)
•
Maximum IOPS (the maximum number of I/Os per second)
•
Average Throughput (average MB/s value)
•
Minimum Throughput (minimum MB/s value)
•
Maximum Throughput (maximum MB/s value)
•
Total Delay Time (total delay time of commands by QoS control)
•
Average Delay Time (average delay time per command by QoS control)
●
Drive Performance Information
•
Busy Ratio (drive usage)
Caution
•
When the ETERNUS AF is rebooted or a controller firmware is applied, the performance monitoring
process is stopped. To continue collecting performance data, start the performance monitoring
process.
•
If performance monitoring is started from ETERNUS SF Storage Cruiser, ETERNUS Web GUI or
ETERNUS CLI cannot stop the process.
•
If performance monitoring is started from ETERNUS Web GUI or ETERNUS CLI, the process can be
stopped from ETERNUS SF Storage Cruiser.
2. Basic Functions
Operation Management/Device Monitoring
85
Design Guide
Summary of Contents for ETERNUS AF S3 Series
Page 204: ......
