manualshive.com logo in svg

Fujitsu ETERNUS AF S3 Series, Design Manual

The Fujitsu ETERNUS AF S3 Series is a cutting-edge storage solution designed for seamless data management. Featuring advanced technology and robust performance, it simplifies operations and boosts productivity. Enhance your experience with the Basic Operation Manual, available for free download from our website, manualshive.com.

Share
Download
background image

Microsoft Linkage

The ETERNUS AF supports integrated management of virtualized platforms and cloud linkage by using functions
in Windows Server and System Center.

Figure 74

 

Microsoft Linkage

SAN

SCVMM management server

Instruction

•

 Offloaded Data Transfer (ODX)

Copying in a storage system

SCVMM management console

Hyper-V

 

App

OS

App

OS

App

OS

•

 Space Reclamation

Windows Server

Server application

Backup software

Windows Server

SMI-S

VSS

ETERNUS VSS 

Hardware Provider

ETERNUS AF

: 

Linkage software

: 

ETERNUS AF software (setup tool)

Windows Server

The ETERNUS AF supports the following functions in Windows Server.

•

Offloaded Data Transfer (ODX)
The ODX function of Windows Server 2012 or later offloads the processing load for copying and transferring
files from the CPU of the server to the storage system.

•

Thin Provisioning Space Reclamation
The Thin Provisioning Space Reclamation function of Windows Server 2012 or later automatically releases
areas in the storage system that are no longer used by the OS or applications. A notification function for the
host is provided when the amount of allocated blocks of the TPV reaches the threshold.

•

Hyper-V
Hyper-V is virtualization software for Windows Server.
By using the Hyper-V virtualized Fibre Channel, direct access to the SAN environment from a guest OS can be
performed. The volumes in the ETERNUS AF can be directly recognized and mounted from the guest OS.

2. Basic Functions

Server Linkage Functions 

127

Design Guide

Summary of Contents for ETERNUS AF S3 Series













































































































































































































Reviews:

No comments

Related manuals for ETERNUS AF S3 Series

NEC S2500 User Manual preview
S2500
Brand: NEC Pages: 106
NEC Express5800/R120f-2E Configuration Manual preview
Express5800/R120f-2E
Brand: NEC Pages: 36
IBM 1402 Reference Manual preview
1402
Brand: IBM Pages: 80
WATSON SEVEN Assembly Instructions Manual preview
SEVEN
Brand: WATSON Pages: 12
Harris Nexio G8 Hardware Manual preview
Nexio G8
Brand: Harris Pages: 76
Fishers Woodscraft Home Garden Pub Assembly Instructions Manual preview
Home Garden Pub
Brand: Fishers Woodscraft Pages: 8
Keter City 113L Assembly Instructions preview
City 113L
Brand: Keter Pages: 2
Viking Technology VPFEM4128GSCBMTL Manual preview
VPFEM4128GSCBMTL
Brand: Viking Technology Pages: 36
MCE Technologies Xcaret Pro-99 Installation Manual preview
Xcaret Pro-99
Brand: MCE Technologies Pages: 9
Far Tools WB 100SB Original Manual Translation preview
WB 100SB
Brand: Far Tools Pages: 10
Canon CS100 Instruction Manual preview
CS100
Brand: Canon Pages: 76
NetApp DS2246 Installation And Service Manual preview
DS2246
Brand: NetApp Pages: 74
Reynolds Building Systems Best Barns Denver Assembly Book preview
Best Barns Denver
Brand: Reynolds Building Systems Pages: 20
Westfalia 94 53 56 Original Instructions Manual preview
94 53 56
Brand: Westfalia Pages: 8
Enfora GSM0110UG001 User Manual preview
GSM0110UG001
Brand: Enfora Pages: 44
Sunex Monster Mobile Owner'S Manual preview
Monster Mobile
Brand: Sunex Pages: 13
Promise Technology FileCruiser VA2600 Hardware Installation Manual preview
FileCruiser VA2600
Brand: Promise Technology Pages: 203
QNAP QTS 4.5 Series User Manual preview
QTS 4.5 Series
Brand: QNAP Pages: 575

Brands by name

Popular brands

Load more brands