manualshive.com logo in svg

Fujitsu ETERNUS AF S3 Series, Design Manual

The Fujitsu ETERNUS AF S3 Series is a cutting-edge storage solution designed for seamless data management. Featuring advanced technology and robust performance, it simplifies operations and boosts productivity. Enhance your experience with the Basic Operation Manual, available for free download from our website, manualshive.com.

Share
Download
background image

-

Virtual Volumes (VVOLs)

-

Volumes with SnapOPC or EC Advanced Copy sessions

-

Volumes with sessions created by ETERNUS SF AdvancedCopy Manager

•

Veeam Backup & Replication jobs or operations may fail during a RAID migration, a Thin Provisioning
Volume balancing, or a Flexible Tier Pool balancing.

•

Veeam Storage Integration uses .
Thin Provisioning Volumes (TPVs) or Flexible Tier Volumes (FTVs) are used as copy destination
volumes.
Specify the appropriate value for the maximum Thin Provisioning Pool capacity by taking the total
target volume capacity for Veeam Storage Integration and the number of management generations into
consideration.
For more details about the maximum Thin Provisioning Pool capacity setting, refer to "Thin Provisioning
Pool Management" in "ETERNUS Web GUI User's Guide".

Guidelines for the maximum Thin Provisioning Pool capacity

Maximum Thin Provisioning Pool capacity 

³

 total capacity of TPVs and FTVs + total capacity of the

target volume for Veeam Storage Integration 

´

 (number of management gener 1)

•

It is not recommended to use multiple Veeam Backup & Replication for managing a single ETERNUS AF.
In such configuration, an error might occur at the jobs that are in conflict with each other when being
executed from multiple Veeam Backup & Replication.

 

Note

•

Veeam Storage Integration supports the following volumes.

Table 48

 

Volume Types That Can Be Used with Veeam Storage Integration

Volume type

Copy source

Copy destination

Standard

¡

´

WSV

¡

´

TPV

¡

¡

FTV

¡

¡

SDV

´

´

SDPV

´

´

¡

: Supported 

´

: Not supported

•

Copy destination TPVs/FTVs are automatically created when snapshots are created with Veeam Backup &
Replication.

 

2. Basic Functions

Server Linkage Functions 

126

Design Guide

Summary of Contents for ETERNUS AF S3 Series













































































































































































































Reviews:

No comments

Related manuals for ETERNUS AF S3 Series

Seagate STEA2000400 Faq preview
STEA2000400
Brand: Seagate Pages: 21
Arrow Storage Products SCG67BG Owner'S Manual & Assembly Manual preview
SCG67BG
Brand: Arrow Storage Products Pages: 36
IBM Accesser F5100 Appliance Manual preview
Accesser F5100
Brand: IBM Pages: 34
Tab e.module L5.1 Operation Manual preview
e.module L5.1
Brand: Tab Pages: 26
Denios PolySafe Depot Type C User Manual preview
PolySafe Depot Type C
Brand: Denios Pages: 8
IAC INDUSTRIES QS-930 Assembly Instructions Manual preview
QS-930
Brand: IAC INDUSTRIES Pages: 8
Lowrance EP-85R Installation And Operation Instructions Manual preview
EP-85R
Brand: Lowrance Pages: 32
ABSCO SHEDS 30082SECOK Manual preview
30082SECOK
Brand: ABSCO SHEDS Pages: 23
Seagate Barracuda 5400.1 ST340015A Installation Manual preview
Barracuda 5400.1 ST340015A
Brand: Seagate Pages: 2
Infotrend EonStor DS B Series Hardware Manual preview
EonStor DS B Series
Brand: Infotrend Pages: 157
Hitachi CinemaStar 5K1000 Product Reference Manual preview
CinemaStar 5K1000
Brand: Hitachi Pages: 12
Hitachi Deskstar 180GXP Quick Installation Manual preview
Deskstar 180GXP
Brand: Hitachi Pages: 2
Hitachi Deskstar 120GXP Quick Installation Manual preview
Deskstar 120GXP
Brand: Hitachi Pages: 2
Hitachi Adaptable Modular Storage 2000 Best Practices Manual preview
Adaptable Modular Storage 2000
Brand: Hitachi Pages: 24
Hitachi Deskstar 7K1000.B Install Manual preview
Deskstar 7K1000.B
Brand: Hitachi Pages: 2
Hitachi APCQ Installation, Operation And Maintenance Instructions preview
APCQ
Brand: Hitachi Pages: 47
Hitachi Deskstar 7K250 Quick Installation Manual preview
Deskstar 7K250
Brand: Hitachi Pages: 2
Hitachi Deskstar 7K4000 Quick Installation Manual preview
Deskstar 7K4000
Brand: Hitachi Pages: 3

Brands by name

Popular brands

Load more brands