manualshive.com logo in svg

Fujitsu ETERNUS AF S3 Series, Design Manual

The Fujitsu ETERNUS AF S3 Series is a cutting-edge storage solution designed for seamless data management. Featuring advanced technology and robust performance, it simplifies operations and boosts productivity. Enhance your experience with the Basic Operation Manual, available for free download from our website, manualshive.com.

Share
Download
background image

Optimization of Volume Configurations

The ETERNUS AF allows for the expansion of volumes and RAID group capacities, migration among RAID groups,
and changing of RAID levels according to changes in the operation load and performance requirements while
the system is running. There are several expansion functions.

Table 30

 

Optimization of Volume Configurations

Function/usage

Volume expansion

RAID group
expansion

Migration among
RAID groups

Changing the RAID
level

Striping for RAID
groups

RAID Migration

¡

 (Adding capacity

during migration)
(*1)

´

¡

¡

´

Logical Device
Expansion

´

¡

´

¡

 (Adding drives to

existing RAID
groups)

´

LUN Concatenation

¡

 (Concatenating

free spaces)

´

´

´

´

Wide Striping

´

´

´

´

¡

¡

: Possible, 

´

: Not possible

*1: 

For TPVs or FTVs, the capacity cannot be expanded during a migration.

●

Expansion of Volume Capacity

•

RAID Migration (with increased migration destination capacity)
When volume capacity is insufficient, a volume can be moved to a RAID group that has enough free space.
This function is recommended for use when the desired free space is available in the destination.

•

LUN Concatenation
Adds areas of free space to an existing volume to expand its capacity. This uses free space from a RAID
group to efficiently expand the volume.

●

Expansion of RAID Group Capacity

•

Logical Device Expansion
Adds new drives to an existing RAID group to expand the RAID group capacity. This is used to expand the
existing RAID group capacity instead of adding a new RAID group to add the volumes.

●

Migration among RAID Groups

•

RAID Migration
The performance of the current RAID groups may not be satisfactory due to conflicting volumes after
performance requirements have been changed. Use RAID Migration to improve the performance by
redistributing the volumes amongst multiple RAID groups.

●

Changing the RAID Level

•

RAID Migration (to a RAID group with a different RAID level)
Migrating to a RAID group with a different RAID level changes the RAID level of volumes. This is used to
convert a given volume to a different RAID level.

•

Logical Device Expansion (and changing RAID levels when adding the new drives)
The RAID level for RAID groups can be changed. Adding drives while changing is also available. This is
used to convert the RAID level of all the volumes belonging to a given RAID group.

2. Basic Functions

Optimization of Volume Configurations 

62

Design Guide

Summary of Contents for ETERNUS AF S3 Series













































































































































































































Reviews:

No comments

Related manuals for ETERNUS AF S3 Series

Spectra Logic Spectra 2K Library User Manual preview
Spectra 2K Library
Brand: Spectra Logic Pages: 93
Soyntec HDD Box 250 User Manual preview
HDD Box 250
Brand: Soyntec Pages: 8
Keter DUOTECH HIGH-STORE+ 1403609 User Manual preview
DUOTECH HIGH-STORE+ 1403609
Brand: Keter Pages: 36
dallmeier DAS-300 E Installation And Commissioning Manual preview
DAS-300 E
Brand: dallmeier Pages: 32
Alphacool HDX PRO WATER Quick Start Manual preview
HDX PRO WATER
Brand: Alphacool Pages: 2
IBM H4S Setup, Operator, And Service Manual preview
H4S
Brand: IBM Pages: 141
Arcserve UDP 8100 Hardware Installation Manual preview
UDP 8100
Brand: Arcserve Pages: 18
PQI Traveling Disk U250 User Manual preview
Traveling Disk U250
Brand: PQI Pages: 20
Western Digital Caviar Green WD10EACS Specifications preview
Caviar Green WD10EACS
Brand: Western Digital Pages: 2
Corvus systems Corvus User Manual preview
Corvus
Brand: Corvus systems Pages: 291
Zte MY39 User Manual preview
MY39
Brand: Zte Pages: 23
MasterCraft 068-7306-2 Instruction Manual preview
068-7306-2
Brand: MasterCraft Pages: 24
morse 80i Operator'S Manual preview
80i
Brand: morse Pages: 7
Playcore ultra site TRSQ-20 Manual preview
ultra site TRSQ-20
Brand: Playcore Pages: 9
Sjobergs KVADRATEN Assembly Instructions preview
KVADRATEN
Brand: Sjobergs Pages: 2
ECOSAFE B18M Instruction Manual preview
B18M
Brand: ECOSAFE Pages: 7
PrimeArray 4xxx User Manual preview
4xxx
Brand: PrimeArray Pages: 208
Lakeshore FF464 Assembly Instructions preview
FF464
Brand: Lakeshore Pages: 4

Brands by name

Popular brands

Load more brands