Fujitsu 1PRIMERGY RX600 S4, User Manual

Page: 97 / 242

97
PRIMERGY RX600 S4 User's Guide
3
Save the changes, and exit BIOS Setup Utility.
4.5.4 Using the Fiber Channel Controller (PG-FC202)
To use the Fiber Channel Controller (PG-FC202), the driver needs to be updated after installing the OS.
You can use the driver supplied with the Fiber Channel Controller or download it from the Fujitsu
PRIMERGY website (http://primergy.fujitsu.com).
4.5.5 Turning the Power On via a LAN
You can turn the power on the server from a client (via a LAN) by utilizing the Wakeup on LAN (WOL)
function.
` Be sure to install ServerView to control the power supply via a LAN.
` When the power cable is disconnected from the server or the server is powered off due to power
interruption, restart the server. If not, the WOL function will be disabled.
` The upper I/O riser card LAN port does not support the WOL function. When you use the WOL
function, use the onboard LAN port or the lower I/O riser card LAN port.
„
BIOS Setup Utility setting
To manage the power supply via a LAN, start up BIOS Setup Utility, select the [Power] menu, and then
set [LAN] to "Enabled". The "Enabled" is set as the initial setting.
The setting on the OS takes priority in the setting of WOL enabled or disabled. For Windows, use
"Intel
®
PROSet".
4.5.6 Changing the System Drive Size (only for Windows
Server 2008)
For Windows Server 2008, the partition size can be extended or reduced after installation has completed.
„
Extending the partition size of a system drive
To extend the partition size of a system drive, follow the procedure below.
1
Log on to the server with administrator privileges.
2
Click [Start] – [All Programs] – [Administrative Tools] – [Server Manager].
Server Manager starts.