Fujitsu 1PRIMERGY RX600 S4, User Manual, Page: 24 / 242

24
Chapter 1 Overview
o
System reset button ( )
Press the button to reset and restart the system.
`
Do not restart the system when the hard disk access LED is blinking. Data in the hard disk may
be damaged.
p
Maintenance button
The button is used for maintenance by your support personnel. Do not use this button by yourself.
q
Fan module
The server has four system fans as a standard feature, and a redundant function is effective.
r
Fan module failure LED
The LED indicates a fan module status. At a fan module failure, it is lit amber
.
s
2.5-inch storage bay
Install internal hard disk units.
t
Hard disk failure LED
In an array system configuration, the LED is lit amber when an error is detected in the internal
hard disk unit.
It is lit or blinking depending on the hard disk status as follows.
u
Hard disk access LED
The LED is lit green when data is being written to or read from the hard disk. When the hard disk
is not accessed, it is not lit.
table: Indication of hard disk failure LED
LED Description
Off In normal mode or hot spare mode
Amber
Error detected in the hard disk (in an array configuration)
Amber (blinking)
Rebuilding or faulty hard disk replacement in progress