Fujitsu 1PRIMERGY RX600 S4, User Manual

Page: 87 / 242

87
PRIMERGY RX600 S4 User's Guide
4.4 Creating Maintenance Tools and
Driver Disks
This section explains how to create the server maintenance tools and driver disks
with FloppyBuilder function of ServerStart.
With FloppyBuilder function of ServerStart, you can create the following tools:
• "Server Management Tools" disk
• DOS Diskette
FloppyBuilder can be used under environments such as:
• The ServerStart system started on a client computer (recommended)
• The ServerStart system started from PRIMERGY Startup Disc on the server
`
When creating the tools on a client computer, it is necessary to install ServerStart on the client
computer beforehand.
If ServerStart of a different version is installed on the computer, make sure to uninstall the ServerStart.
Then perform installation again. For details on how to uninstall ServerStart, refer to "
„
Uninstalling
ServerStart" ( J pg.89).
4.4.1 Installing ServerStart
Install ServerStart on a client computer when creating a driver disk using FloppyBuilder function.
z
System requirements for client computers
Client computers must satisfy the following requirements.
Using ServerStart on the server
` ServerStart can be installed to the server where Windows Server 2003 is installed. To install
ServerStart, follow the procedure below. Note that ServerStart cannot be installed on the server where
Windows Server 2003 x64 is installed.
1
Insert PRIMERGY Startup Disc into the client computer.
The [PRIMERGY Startup Disc] window appears.
Hardware Personal computers operated with Windows XP Professional
(A DVD drive and minimum 10MB free disk space are required.)
Software
Microsoft
®
Internet Explorer 5.5 or later