Fujitsu 1PRIMERGY RX600 S4, User Manual

Page: 118 / 242

118
Chapter 6 Installing Internal Options
6.2 Removing and Attaching Covers
Remove covers to install peripheral devices. Follow the procedure below to remove
covers.
6.2.1 Removing the Top Cover
1
Open the rack door.
J
"1.4.1 Opening the Rack Door" (pg.30)
2
Remove all the cables connected to the server.
Hot-pluggable expansion cards can be replaced without turning off the server.
3
Remove the retaining screws used to fasten the server to the rack.
4
Slide the server.
Hold the handles from inside, and slide the server toward you until it clicks to lock.
`
For details on how to slide the server out of the rack, refer to "Start Guide".
• Before removing or attaching covers, turn off the server, all peripheral devices,
and any other connected devices. Also unplug all power cables from the
outlet. Failure to do so can cause electric shock. ("1.4.3 Turning Off the
Server" (
J pg.34)).
• When working with the server powered on, make sure that the
cables on the backside, such as the power cable, are not
unplugged or become entangled, when sliding the server out of
the rack.