Fujitsu 1PRIMERGY RX600 S4, User Manual, Page: 214 / 242

214
Chapter 8 Operation and Maintenance
7
Click [Finish].
The restoration start window appears.
8
Check the checkbox, and click [OK].
System restoration starts.
After the restoration has completed, the system is automatically rebooted. After rebooting, the
system is restored using the backup data.
`
For operation with a BitLocker drive encryption set, perform the encryption settings again after
the system restoration.
8.6.2 For Windows Server 2003
z
Items required
• Windows Server 2003 CD/DVD (Installation disc)
• Automated System Recovery (ASR) floppy disk (created beforehand)
• Backup media (created beforehand)
• Driver disk (for an array controller)
For details on required driver disk and how to create a driver disk, refer to "4.4 Creating
Maintenance Tools and Driver Disks" (
J
pg.87).
`
Before turning on the server, connect a USB floppy disk drive. For details, refer to "Appendix C
External Floppy Disk Drive (USB) Notes on Usage" (
J pg.227).
1
Turn on the server, and insert the Windows Server 2003 CD/DVD (Installation
disc) immediately.
Check that no floppy disk is inserted.
2
When the active area is specified on the hard disk, the following message
appears. Press any key while this message is displayed.
Setup window for Windows Server 2003 appears.
3
The following message appears at the bottom of the window. Press the [F6]
key.
`
This message will be displayed for a short time after the setup window (blue screen) appears.
Press the [F6] key immediately after the window turns blue.
Press any key to boot from CD....
Press F6 if you need to install a third party
SCSI or RAID driver ...