Page 54
§ 6.
How to:
§ 6.1.
Replace PCB
§ 6.1.1.
Preparations before Replacement
1.
Refer to section 2.4.1. Select “Config Code” in [secret menu].
2.
Record “Config Code” codes (3 each). Each code has 15 characters. Characters used for the
configuration codes are “ABCDEFGHIJKLMNOPQRSTUVWXYZ” and “234567”.
3.
Turn the splicer power off and remove Power Supply
§ 6.1.2.
Removal of PCB
1.
Refer to section 5. Remove all connectors from Main PCB. Note – Remove screw that holds black
cathode cable to Frame-Base.
2.
Refer to section 4.6. Remove Power Unit Dock from Frame-Base
3.
Refer to Fig. 6.1.1. Remove corner screws from shield board.
4.
Refer to Fig. 6.1.2. Remove 2 screws and 4 posts from main PCB.
Shield board
Release 4 screws
Release 4 posts
Release 2 screws
Fig. 6.1.1
Fig. 6.1.2
5.
Refer to Fig. 6.1.3. Detach power supply cord from main PCB. Connectors of power supply are
reverse side of PCB.
Left side view of PCB
Cathode: Black
Anode: Red
Fig. 6.1.3