FujiFilm FinePix S2 Pro, Owner'S Manual

Page: 16 / 65

30 31
TAKING PICTURES
Basic
Photography
2
Single
Area AF
Dynamic
AF
6
Set the metering system selector to “ ' ” (Matrix
Metering).
●
!
Matrix Metering indication “
'
” appears in the viewfinder.
●
!
Take care not to obscure the lens with your fingers or the
shoulder strap.
7
Set the exposure mode select dial to “ P ” (Auto-
Multi Progam).
8
Brace your elbows against your body and hold
the camera with both hands.
9
Position the central focus area over the subject.
●
!
If the subject is not inside the AF frame, move the focus
area or take the picture using AF lock (
➡
P.33).
1
Set the focus mode selector to “ S ” (Single-AF
Servo).
2 1
Press the “
w
” button to display the AF
setting on the rear display panel.
2 Press the “F2” button to select “ z ” single
area.
●
!
Make sure to turn the focus mode selector until it clicks
into position.
3 1
Unlock the 4-direction button.
2
Press “
d
”, “
c
”, “
a
” or “
b
” to position the
focusing area in the center.
4
Lock the 4-direction button to prevent accidental
improper use.
5
Hold down the release mode switch unlock
button and set the release mode switch to “
e ”
(Single-frame).
●
!
The selected focus area indicator appears on the top
display panel, in the viewfinder display and on the
viewfinder screen (
➡
P.39).
0 1
0 2
0 1 0 2