FujiFilm Drypix 5000, Operation Manual

Page: 51 / 142

Utility Operation
1
2
3
4
5
6
7
006-240-60 2007.03
4-11
8 When test pattern film is output after a while, make sure that image has been printed
correctly.
[Fig. 4.18] Standard Test Pattern (SMPTE) - Example: For an output image
30%
40% 50% 50% 60%
20%
10%
0%
70%
80%
90%
100%
0/
5% 95/
100%
SMPTE TEST PATTERN
REV. 1 0 / 6 / 8 3 © 1 9 8 3
9 / 6 / 8 4
When the Service Setting has been performed, a user-defined test pattern can be selected.
From the Test Pattern screen, select the “
User Settable ”.
Then, follow the same operation procedures as for the SMPTE pattern.
[Fig. 4.19.1]
When the Service Setting has been performed, a test pattern to be used for confirmation of
the resolution can be selected.
From the Test Pattern screen, select the “
Spatial Resolution ”.
Printout will then start after Dmax is selected.
[Fig. 4.19.2]
Select.
Select.