FujiFilm Drypix 5000, Operation Manual

Page: 31 / 142

Basic Operation
1
2
3
4
5
6
7
006-240-40 2006.09
3-9
5 Place a new film pack in the empty tray following the procedure below.
5-1 Remove the film pack from the carton.
5-2 With the film pack arrow mark pointing upward, set it in place so that the mark on
the label of the film pack is aligned with the mark on the tray as illustrated below.
[Fig. 3.15]
5-3 Break the label while lifting the end of the film pack slightly, and then open both
sides of the film pack as shown below.
[Fig. 3.16]
5-4 Using the cutter placed on the right-hand side of the operation panel, cut the film
pack along with the tray edge as illustrated below.
[Fig. 3.17]
Cutter
CAUTION If the cutter’s blade protection is broken, the blade will be exposed posing then
danger to the user. Do not touch the unprotected blade.
Replace a dull cutter hard to cut the film pack, as necessary.
Use the DI-HL, DI-HLc, or
DI-ML film. (
The arrow mark is
printed on the red background.
For the DI-ML film, it is printed
on the green background.
)
Images cannot be recorded
correctly if films such as
DI-AL, etc. are used.