FujiFilm Drypix 5000, Operation Manual

Page: 32 / 142

3-10
006-240-20 2004.03
Basic Operation
5-5 Replace the cutter in the position where it has been placed.
5-6 Slowly push the film tray in until it locks firmly.
CAUTION
When locking the film tray, place the hand as illustrated below being careful not
to pinch your fingers.
[Fig. 3.18]
5-7 When the film pack barcode has been read correctly, a beep will sound.
When a beep sounds or the [Fig. 3.19] screen appears,
gently
and
slowly
pull
out then the film pack end that is outside the film tray.
[Fig. 3.19]
[Fig. 3.20]
As for failure in reading the film pack barcode, see Section 5.4 Failing in Reading a
Barcode, Chapter 5 Troubleshooting (p.5-27).
WARNING
Do not take unused films out of the film pack that has once been loaded into the
equipment and opened or add films to the film pack loaded, which will result in
misoperation or failure of the equipment.
The film pack contains a protective sheet, in addition to specified number of recording
films. This protective sheet will remain in the film pack even after those recording films have
been printed and it cannot be used for image reading. Discard it together with unnecessary
films.
An attempt to pull the film pack out at a slant or
roughly will cause it to be broken.
Be careful so that your fingers are not caught in
the button of the tray.