FujiFilm Drypix 5000, Operation Manual

Page: 27 / 142

Basic Operation
1
2
3
4
5
6
7
006-240-20 2004.03
3-5
Reading (Storing) Images
No operations are required on this equipment because connected devices are responsible
for those operations.
Printing Images (film output)
Because operations, such as film output command, etc., are performed by DICOM-
networked devices that enable the DICOM PRINT function, no specific operations are
required on the DRYPIX 5000 main unit for film output purposes.
However, be sure to observe the following cautions when outputting films from the
DRYPIX 5000.
■
Cautions to be observed when outputting films
Do not forcibly pull out a film that is being output.
If the film that is being output is forcibly pulled out, it can be damaged.
Never open the Front Cover and/or Eject Cover during image recording.
If the Front Cover and/or Eject Cover is opened by mistake during image
recording, operation will be suspended for safety reasons.
At the same time, the alarm will sound and the message saying that the cover is
opened will be displayed on the operation panel.
Note that a film (image) that was being processed when the cover was opened
will not be printed in the correct density.
A film (image) thus printed cannot be used for intended purposes.
A maximum of 150 films can be stacked in the output film tray. However,
exercise care so as to remove stacked films before the tray becomes full.