FujiFilm Drypix 5000, Operation Manual

Page: 117 / 142

5-31
006-240-30 2006.05
Troubleshooting
1
2
3
4
5
6
7
5.5.3 When a new film pack was loaded and the tray closed, but the positioning
was wrong:
[Fig. 5.36] will appear.
Since the tray has not been locked, pull out the tray.
Place the film pack in the correct position and pull out the film end, and close the tray.
[Fig. 5.38]
●
Placed up-side down
●
Placed front side back
To suspend film replenishment, press the button and open/close the tray
again.
5.5.4 After placing a new film pack and pulling out the film pack,
the tray was closed without cutting the bottom end of the film pack:
In this case, since the bottom end of the film pack is not cut out, the film pack cannot be
removed.
Press the button to unlock.
Pull out the tray and cut the bottom of the film pack with a cutter, and push back the tray
in.
[Fig. 5.39]
If the film pack is harshly deformed, remove the pack and place a new one.
CAUTION
If the cutter’s blade protection is broken, the blade will be exposed posing then
danger to the user. Do not touch the unprotected blade.
Replace a dull cutter hard to cut the film pack, as necessary.
Cutter