Fujian Xingyi Polishing Machine Co.,Ltd
Manual Of Remote Control Floor Grinder 800-4E
Factory Addresss:NO.C2 ,Area 11 ,AnPing Development Area, Quanzhou ,Fujian province ,China
Postal Code:362200
Tel: +86-595-36792992
Mob: +86-15960788816
Use only Xingyi parts and accessories, For your own safety, The Safety of others and the life of your machines.
55
Attention
：
When you storage it long time, Should be reset Emergency button connect three power
And press on battery start systems for charge.
6.5 Overloading
There is overload protection in the inverter, when the machine overload, the control
panel display will show the machine overload, just need to pull out of the plug of the power
source.
6.6 Maintenance Items
6.6.1 Daily Maintenance of machine: Timely replacement when the machine work
abnormal, in order to avoid secondary damage, or greater losses.recommended daily
implementation
1) After finished work, please carry out routine cleaning of the equipment, mainly on the
waterproof cover, disc on the sticky ash to clean up, to avoid the impact of the next use and
improve the efficiency of the next day.
2):Check the received wires, plugs, sockets are connected or damaged? Whether the
received wire meets the dimensions
3):Checking all switches if there are not damage or not
4):Checking the rack if it work properly or not?
5):Cleaning the tank to avoid sand in the water tank, and check the water tank and
water switch is normal or not.
6):Checking the dust cover if it is damaged or not.
7):Checking all screws if they are loose or not (recommended monthly tightening again,
check screws of plate whether they are loose or not)
8) Checking the gear box cover if it is deformed or not.
9)Checking the flatness of gridning disc, and whether screws are loose or not.
10)Checking the cushion if it is damage or not?
11)Checking the the gear box whether it is oil spill or not
