Fujian Xingyi Polishing Machine Co.,Ltd
Manual Of Remote Control Floor Grinder 800-4E
Factory Addresss:NO.C2 ,Area 11 ,AnPing Development Area, Quanzhou ,Fujian province ,China
Postal Code:362200
Tel: +86-595-36792992
Mob: +86-15960788816
Use only Xingyi parts and accessories, For your own safety, The Safety of others and the life of your machines.
47
5
、
Machine operation (remote control operation)
5.1 overview
When the following parts description the different position and mainly operation, how to
install polishing pads when remote control.
Note
：
1
、
Grinding machine only allowed to use and repair when the one already accept the
training the theory and the practice, and reading the manual carefully.
2
、
When grinding need to use protection device, such as protection gloves, protection
mask , working suit, safe helmet , and insulating shoes.
5.2 Machine position description
The machine position is the same as manual, details could find the in Manual, the
unique difference is when grinding ,turn on the emergency switch of the remote control
panel and power switch could be adjust the machine position.
Note:
1
、
When wrong operation, grinding machine will be fall down , it will damage the
equipment and the human safe.
2
、
When the hand grip key is be pulled out, sometimes will be stuck, in this moment , we
need to shake the hand grip and in the same time pull our the key.
3
、
When reset the hand grip, swing bar, and the clutch , must be ensure the lock device
is locked.
4
、
When machine in some relative device, must be turn on the emergency switch of the
remote controller , turn off the power source.
5
、
When grinding machine adjust to package and carriage position ,sometimes have the
extrusion damage risk, so must be careful.
6
、
When grinding , dust suction is harmful, so please wear professional mask to ensure
the human safe when grinding.
7
、
Upright, lay down the machine, must
remember to yourself safe, to avoid the damage of machines.
