Fujian Xingyi Polishing Machine Co.,Ltd
Manual Of Remote Control Floor Grinder 800-4E
Factory Addresss:NO.C2 ,Area 11 ,AnPing Development Area, Quanzhou ,Fujian province ,China
Postal Code:362200
Tel: +86-595-36792992
Mob: +86-15960788816
Use only Xingyi parts and accessories, For your own safety, The Safety of others and the life of your machines.
12
3
、
Machine
3.1 Overview
800-4E is used to grind, coarse grind, prepare and polish concrete, natural stone and
terrazzo floors or other materials specified in this manual .
800-4E is equipped with radio control. Radio control is an accessory that eases the work
considerably. ( Pleas find it in Manual )
The handle can be set in a number of different tilt positions. When you use the machine
manually, adjust to your best position. The machine’s grinding head can be equipped with
one of several different grinding discs that are covered by a sealed sloping cover against the
floor. Because the cover is floating, the dust uptake is optimized since it is always in contact
with the surface.
Always make sure that a dust extractor is connected to the grinder during dry grinding to
prevent as far as possible exposure to dust particles of operators, people in the vicinity, the
grinder and other equipment. Warn that the dust that is sucked up may be harmful if inhaled,
wear your mask to guarantee the healthy.
The machine can be easily equipped with a large number of tools, depending on the
floor material to be ground.