Fujian Xingyi Polishing Machine
Co.,Ltd
Manual Of Remote Control Floor Grinder 800-4E
Factory Addresss:NO.C2 ,Area 11 ,AnPing Development Area, Quanzhou ,Fujian province ,China
Postal Code:362200
Tel: +86-595-36792992
Mob: +86-15960788816
Use only Xingyi parts and accessories, For your own safety, The Safety of others and the life of your
machines.
21
1
、
Manufacturer logo
2
、
Directions control joystick: Forward, backward, left and right turn.
①
Push forward the joystick gently, machine walks forward according to
the walking speed.
②
Push backward the joystick gently, machine walks backward according
to the walking speed
③
Keep pushing the joystick to the right, machine walks to the right
according to the walking speed
④
Keep pushing the joystick to the left, machine walks to the left
according to the walking speed
⑤
After the turning of machine, reset joystick, machine will
work according to the last forward or backward instruction to
work.
⑥
Machine walking speed
：
0-30m/min
。
3
、
Start switch
：
Start the control panel.
4
、
Emergency stop switch
：
Start or terminate the control of wireless, stop
the machine.
5
、
Smart key slot: mainly to insert the smart key
。
6
、
Future function
：
Leave for future functions.
7
、
Motor forward & reverse switch: Three gears in total: Push forward,
motor runs in forward direction, stay in the middle, motor is not running, push
backward, motor runs in reverse direction.
8
、
Power indicator for transmitter : Green light will be on when the
battery voltage is low
+
+
-
电量指示
-
, replace the battery in 20 minutes.
9
、
Brake switch: Instant brake for driving wheel.
