Fujian Xingyi Polishing Machine Co.,Ltd
Manual Of Remote Control Floor Grinder 800-4E
Factory Addresss:NO.C2 ,Area 11 ,AnPing Development Area, Quanzhou ,Fujian province ,China
Postal Code:362200
Tel: +86-595-36792992
Mob: +86-15960788816
Use only Xingyi parts and accessories, For your own safety, The Safety of others and the life of your machines.
52
2) Open the oil filler with M5 inner hexagon
3) Rotate the grinding plate to the crew(M14 inner hexagon black screw)(picture 1)
4)Remove the screw of oil filler,and also remove the screw of oil drain hole. (picture 2)
5) Use a small barrel to pick the abandoned oil.(picture 2)
6) Until no any abandoned oil output,locking the screw of oil drain hole
7) Please make sure the oil filler and plate is vertical (picture 4) ,if not please rotate the
grinding plate and make sure the hole at the right position then put
8) down the machine to operation status . (picture 5).Add 320# gear oil (picture 6)
after finishing ,locking the screw of oil filler,put the plate of ill filler back the
9) original place and locking it. (picture 7 and 8 )
6.3 Clean
