Fuji Electric ZSS-8 Series, Instruction Manual

Page: 88 / 119

- 78 -
INZ-TN8ZSS-E
Select the channel (CH1 or CH2) connected to AI
terminal by the key or the key, and
press the key.
( )
Enter the temperature (°C) corresponding to 4mA
DC output of the output signal of the thermome-
ter. Change the numeric value by the key
or the key, and move the digits by the
key. Press the key to validate the set
input value.
( )
Enter the temperature (°C) corresponding to
20mA DC output of the output signal of the
thermometer. Change the numeric value by the
key or the key, and move the digits
by the key. Press the key to validate
the set input value.
( )
Implement the same procedure as for the sensor
setting of pressure gauge, flow meter, oxygen
analyzer (O
2
) or the moisture meter (H
2
O).
ENT
ENT
ENT
ENT
ENT
ENT