Fuji Electric ZSS-8 Series, Instruction Manual

Page: 45 / 119

INZ-TN8ZSS-E
- 35 -
5.3.2 “Menu” screen
Press the
key while the “Measurement” screen is displayed, and the “Menu” screen appears. (It does
not appear when pressing the key while other screen is displayed. In that case, Press the key to
display the “Measurement” screen, and then press the key.)
5.3.2.1 Name (functions)
(1) Zero Calibration ············ Used for performing zero calibration.
(2) Span Calibration ············ Used for performing span calibration.
(3) Alarm Log ··················· Displays the alarm occurred in the past.
(4) Alarm Setting ··············· Used for setting range of upper/lower limit alarm or analog output range
of the measurement value.
(5) Output Hold ················· Used for holding analog output.
(6) Parameter Setting ·········· Used for setting each parameter.
(7) Display / Output ············ Used for setting the measurement value to be displayed on the “Meas-
urement” screen such as switching “Instantaneous value / Average val-
ue” or “Wet / Dry”.
(8) Input Signal ················· Used when analog input range or fixed value are set for concentration
correction or air purge alarm.
(9) AO Select ··················· Used to determine what to output to the analog output terminal.
(10) Analyzer Information ······ Display the calculation information of concentration.
(It is user for trouble analysis)
MODE
MODE -5+
MODE