Fuji Electric ZSS-8 Series, Instruction Manual

Page: 30 / 119

- 20 -
INZ-TN8ZSS-E
4.9 Installation of the transmitter box and the receiver box
(1) Prepare “Receiver box or transmitter box” and “Hexagonal socket bolt” as shown in the following fig-
ure (Fig. 4
－
10). Check that the O-ring is mounted on near the lens (refer to Figure below) of the re-
ceiver unit or the transmitter unit
(2) Mount “Receiver box or transmitter box” on “Angle adjustment unit” so that the socket is positioned
bottom. (Be careful not to touch the lenses of the transmitter box and the receiver box during installa-
tion.)
(3) Fix it with the 6 “hexagonal socket bolts”.
Fig. 4
－
10