Fuji Electric ZSS-8 Series, Instruction Manual

Page: 63 / 119

INZ-TN8ZSS-E
- 53 -
6.3 Alarm setting
Select “Alarm Setting” from the “Menu” screen, and press the key. On the “Alarm Setting Gas” screen,
select a component by moving the with the key and the key.
Press the key. “Alarm Setting” screen is displayed.
6.3.1 Alarm value ON/OFF
ON validates the High/Low limit alarm output, alarm display, alarm record for the measured concentration.
Select OFF to invalidate.
Note
When OFF is selected, “High/Low limit setting”, “Analog Output / Alarm Record” cannot be set.
Point the to “H-Limit” or “L-Limit” by the
key and the key, and press the
key.
( )
ENT
ENT