Fuji Electric ZSS-8 Series, Instruction Manual

Page: 12 / 119

- 2 -
INZ-TN8ZSS-E
2. CHECKING DELIVERED ITEMS
Upon receiving the recorder unit, check if the correct quantity of the accessories are supplied.
Separately supplied document are given first priority. When you have purchased or want to purchase spare
parts for 1-year operation or a list of calibration/installation fixtures, refer to “APPENDIX 2”at the end of
this Manual.
Table 2
－
1 Products Table 2
－
2 Standard accessories
No. Product name Quantity No. Product name Quantity
1. Control unit 1 1. Bolt (*1) 8 (16)
2. Receiver box 1 2. Nut (*1) 8 (16)
3. Transmitter box 1 3. Spring washer (*1) 8 (16)
4. Angle adjustment unit 2 4. Flat washer (*1) 8 (16)
5.
Cable between receiver unit and
control unit
1 5.
Companion flange packing or flange
packing specified for use in high
temperature
2
6.
Cable between receiver unit and
transmitter unit
1 6. Bolt for angle fine adjustment (*2) 6
7. Power supply fuse (250 V AC/T1A) 2
8. Instruction manual 1
9.
Bolt for connecting the receiving unit
and the transmitter unit
12
10.
Ferrite core (for power cable, outside
the transmitter case)
1
11.
Ferrite core (for power cable, inside
the transmitter case)
1
*1: When the 9th code is “B”, 16 pieces are provided. For other cases, 8 pieces are provided. The length of
the bolts are 55 mm when the 9th code is “A”, and 70 mm when the 9th code is “B”, “C”, or “D”.
Inch-sized bolts are not provided.
*2: The bolts may be delivered being attached to the angle adjustment unit.