105
9.5.7.2
Add the Device to the Configuration
Select the device in the
Hardware catalog
and drag the device into the PROFINET IO system
configuration as shown in Figure 92.
Figure 92: Add Device to Configuration
9.5.7.3
Select the IO Controller
On the device, click “Not assigned” and select the appropriate PLC
PROFINET interface as shown in Figure 93. This will assign the
device to the PROFINET IO system as shown in Figure 94.
Figure 94: PROFINET IO System
9.5.7.4
Assign IO Module
Click on the device and then click on the
Device view
tab. In the
Hardware catalog
, expand
Module
and add a module “IN: XX WORDS, OUT: YY WORDS” into
Slot
1. The module will determine the input
and output sizes. In this example, the module “IN: 02 WORDS, OUT: 02 WORDS” is selected. Select a
module with the appropriate input and output sizes for your specific application. Refer to Figure 95.
Figure 95: Add IO Module
Figure 93: Select IO Controller
