FT500 SFI / FT500LITE SFI
5
2. Presentation
Congratulations! You are now part of the high performance world
of FuelTech! Know that this equipment is exactly the same used in
many winners cars around the world. From NHRA drag race cars and
circuit race cars to exotic brands with 12 cylinder, the FT500 SFI and
FT500LITE SFI represent the maximum technology, ease of use and
performance that an ECU can provide. We, from FuelTech, wish you
have many victories and have fun on your path, because winning is
in our DNA!
The FuelTech FT500 SFI/FT500LITE SFI is a fully programmable
ECU, which allows you to change all fuel and timing tables, as the
engine conditions, in real time. You can tune your engine directly
on the ECU, through its screen touchscreen 4.3’’ (only FT500 SFI)
or via FTManager software (FT500 SFI and FT500LITE SFI) with
high-speed USB communication. The tuning of main fuel and timing
tables may be performed in basic (2D) or advanced (3D) mode with
configurable break points. It can be applied to any type of engine Otto
cycle using indirect injection, 2 or 4 strokes, up to 12 cylinders or
4 rotors, gasoline, ethanol, methanol, CNG, nitromethane and other
compatible fuels.
The electronic throttle control is fully integrated to the module and
configured directly in the display without any additional computer or
module. It is possible to set alerts to dangerous situations for the
engine, such as over rev, low oil pressure, high engine temperature,
among others. These alerts can also be programmed to limit rpm or
shut off the engine bringing more security the user. The ECU also
features five maps fully independent, allowing different settings to
engines and/or cars.
The timing control can be done through distributor or crank trigger.
Thus, it is possible to work with a single coil, double coils or COP coils,
on wasted spark or sequential ignition. The fuel injectors can work on
sequential, semi-sequential or multipoint mode, with individual cylinder
trim. Tune the injection phase angle is also possible.
The equipment also has the Favorites menu, which seeks to facilitate
access to the main engine setup menus, allowing executing rapid
changes in maps. The dashboard panel is fully configurable, where
the user can change the display size and the types of readings for
each parameter, as well as reading range presented on the screen.
The FT500LITE SFI is a FT500 SFI without touchscreen. If you want
to upgrade your FT500LITE SFI to FT500 SFI, please contact our
technical support.
Presentation
