User’s manual · TFF 310 CI
- 8 - TFF 310 CI version_en_2.0 FTE maximal
Adding services:
1. Select “Service to add” option
2. Select one of the multiplex
services you want to add.
3. Once you have chosen the
service, select the “Add/Rem”
button to include the service in
the multiplex.
Note: It is not recommended to exceed the 85% of the maximum capacity of the multiplex due to the possible
variability of the bits rate of the inputs services.
Recomendad capacity
(lower to 85%)
Excessive capacity
It is recommended to remove
services
Removing services:
1. Select the “Service to remove”
option.
2. Select one of the multiplex
services you want to remove.
3. Once you have chosen the
service, select the “Add/Rem”
button to remove the service in
the multiplex.
- Remove all services: It allows removing all the services included in the
multiplex.
- Modify LCN: The LCN function allows assigning automatically a
predetermined position to each one of the services of the multiplex.
This function will allow the users who have a receiver with LCN support
to make the ordination of channels automatically.
Note: If in the existing installation there are already services that have
LCN system, you will have to configure the position of the module
services in order to avoid conflicts with other net services.
Summary of Contents for TFF 310 CI
Page 1: ...TFF 310 CI USER S MANUAL...
