User’s manual · TFF 310 CI
- 15 - TFF 310 CI version_en_2.0 FTE maximal
- Adding Services:
1. Select the option “Add services”
through Up/Down buttons. Press OK
to continue.
2. Select one of the multiplex services
you want to add, through Left/Right
keys and select the “Add” button to
include the service in the multiplex
3. A window will appear and it will let
you know that the operation made has
been correct.
- Deleting Services
1. Select the option “Delete services”
through Up/Down buttons. Press OK
to continue.
2. Select the service you want to
delete with the Left/Right keys. Then
press OK over “Rem” in order to
remove it, or press OK over “All” in
order to delete all the services of the
multiplex.
3. A window will appear and it will let
you know that the operation made has
been correct.
Note: It is not recommended to exceed the 85% of the maximum capacity of the multiplex due to the possible
variability of the bits rate of the inputs services.
- Output service name: This option allows editing the services name and changing it. By means the bottoms “Left / Right”
the service to edit is selected, pressing OK the edition mode is on, placing the cursor over the digit the value could be
changed by means the bottoms “Up / Down”. One time finished, the changes are saved pressing OK.
- LCN: The LCN function allows assigning automatically a predetermined position to each one of the services of the
multiplex. This function will allow the users who have a receiver with LCN support to make the ordination of channels
automatically.
Select a channel through Left/Right buttons and introduce the position. Press the “OK” button and the cursor will be
placed over the number. With the keys of the cursor, we can move through all the digits and change the values. Press “OK”
in order to save the changes
Note: If in the existing installation there are already services that have LCN system, you will have to configure
the position of the module services in order to avoid conflicts with other net services.
Output services
Operation finish
TFF 310 CI Mux 0
Output services
PID 00500 ANTENA 3
1.Rem
2.All
BW usage 035%
TFF 310 CI Mux 0
Output services
1.Add services
2.Delete services
BW usage 035%
TFF 310 CI Mux 0
Output services
Operation finish
TFF 310 CI Mux 0
Output services
PID :00500 ANTENA 3
1.Add
BW usage 35%
TFF 310 CI Mux 0
Output services
1.Add services
2.Delete services
BW usage 000%
TFF 310 CI Mux 0
Summary of Contents for TFF 310 CI
Page 1: ...TFF 310 CI USER S MANUAL...