background image

User’s manual · TFF 310 CI 

 

         

- 1 -                TFF 310 CI                 version_en_2.0               FTE maximal 

 
NOTE: This user’s guide is adapted to software version v.1.47of TFF 310 CI dated 09/04/2014. 
For future software updates, you can download the user’s guide from the following website: 

http://www.ftemaximal.com/

 

 

 

Chapter 1.  

Installation.  

1.1.

 

Safety Measures 

1.- Never place the device next to hot sources. 
2.- Never undergo the device to temperatures that exceed its level of operation. 
3.- Never expose the device to leaking nor spattering. 
4.- Never place objects that contain liquids over the device. 
5.- Respect the ventilation slots of the device, do not cover them with any kind of object. 
6.- The space around the device must be free of objects, in a minimum radius of 40cm. 
7.- Avoid locations with possibilities of spilling liquids on the inside of the device, and with important changes of 
temperature. 
8.- Never open the device by yourself due to electric risk. In case of problems, go always to qualified technicians 
9.- Never, under no circumstances, open the device when connected to the electrical net.. 
10.- During the handling it is better to disconnect the device from the electrical net. 
11.- Obey the electricity security rules during the assembling. Use materials that obey the current law. 
12.- The connecting plug must be accessible in a fast and simple way to have a fast disconnection. 
13.- Never touch the plug with wet hands. Also, disconnect always the device before handling the connections. 
14.- Never put any heavy object over the device, since it could get damaged. 
15.- If the device is going to remain some time without use, it is recommendable to disconnect it from the electrical net. 
16.- The repairmen and the maintenance of the device must be done by TV and radio specialised technicians. 
 

1.2.

 

Box content 

 

 
 

 

 
 
 
 

 

 
 

 

Quick installation guide 

2 x Bridge F male – F male 

DC Cable 

 
 

 

 

 
 
 

 

 
 
 
 

TFF 310 

Cable 12 cm PIN to PIN RJ45 – RJ45

Stopper 

 
 

Summary of Contents for TFF 310 CI

























Reviews: