User’s manual · TFF 310 CI
- 3 - TFF 310 CI version_en_2.0 FTE maximal
Stages of TFF 310 CI regenerator
Input
Reception of a terrestrial multiplex with a typical error rate in the output of the antenna.
Case 1: Regeneration
Case 2: Fil Regeneration
Signal regeneration and possibility of making a services filtering.
If the multiplex has encoded channels, in order to distribute them freely you have to install the subscriber card
in the Common Interface slot.
Out
Configuration of the channel and output parameters of a multiplex with a corrected error rate.
1.4.
Programming
TFF 310 CI has two ethernet connectors. In order to make the programming of the module you have to connect the
corresponding programmer to PRO 201 connector.
You can make the programming through the PRO 201, PRO 300 programmers and also through the mediaMAX EVO and
mediaMAX MINI field strength meter.
1.4.1.
Programming modes
With mediaMAX EVO / mediaMAX MINI field strength
meter you can carry out the programming of all the
modules consecutively as long as they are interconnected
with each other through the RJ-45 cable supplied with
each unit.
Through PRO 201or PRO 300, the programming is made
module by module.
Summary of Contents for TFF 310 CI
Page 1: ...TFF 310 CI USER S MANUAL...
