User’s manual · TFF 310 CI
- 7 - TFF 310 CI version_en_2.0 FTE maximal
- Auto Alias: It allows configuring the name/alias of the modules automatically. Options: Channel,
Frequency, Service, None.
-
Upgrade:
- Send Firmware from USB: It allows carrying out the firmware update from the USB device.
- Send firmware to all: It allows carrying out the update of all the modules that are interconnected at the
same time.
- Configure all devices:
- Input values to all devices: It allows copying the current input configuration in all the interconnected
modules.
- Modulator values to all devices: It allows copying the configuration of the current modulator in all the
interconnected modules.
- Output values to all devices: It allows copying the current output configuration in all the interconnected
modules.
- Factory default to all devices: It allows making values by default to all the interconnected modules.
7. Program management
- New program: This option allows creating a program with the current
configuration of a module or group of modules.
- Load program: It allows loading a previously created program on a
module or group of modules.
- Delete program: It allows deleting a program.
- Device to process:
- Current: The creation or loading of a program will be applied
only in the module that is currently connected.
- All: The creation or loading of a program will be applied to
the whole group of connected modules.
- Working disk: With this option we have the possibility of choosing if we want to work into the internal disk or in
the external storage device USB 2.0.
Once the option is selected, a dialog box will appear and we will be able to choose among three different options.
- Auto: The Meter decides where the data will be stored. If there is external memory connected, the Meter
will store the data in it. If not, it will use the internal memory.
- USB: The Meter always will try to use the external memory connected to the USB port. If this memory
has not been connected an error message will be shown, reminding that there was an error storing the
data and it will be not stored.
- Internal: Always the internal memory is used to store the data.
- Load programs from USB: This option allows importing programs from a USB memory to the field strength
meter. Before using this option you must connect a USB memory.
- Save programs to USB: This option allows copying the programs stored in the external USB 2.0 storage device.
- Write Alias: It allows saving the alias of the module in the program. Options: Yes/No
8. Set Output Services
This option allows making the selection of the services that you wish to
include in the output multiplex.
- Add/Remove services: It allows adding the services to the multiplex
and also removing the ones previously included. The lower bar informs
about the available space in the output multiplex. As you add more
services, the space available will decrease.
Once you have tuned a multiplex in the “Input Set Up” section and you
have selected the DVB-T/DVB-H modulator configuration in the
“Modulator Set Up” section, you can make the assignment of the
services that are going to be included in the output multiplex
“Adding/Removing services”.
Summary of Contents for TFF 310 CI
Page 1: ...TFF 310 CI USER S MANUAL...
