background image

User’s manual · TFF 310 CI 

 

         

- 19 -                TFF 310 CI                 version_en_2.0               FTE maximal 

 

1.5.

 

Accessories and example of installation 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

Note: In order to guarantee the right running of the different equipments 
of the installation, we recommend you to provide the inputs and outputs 
which are not used with a 75

 load.

 

 

 

 
 
 
Accesories 

 

 

Programmer 

Mod. PRO 201   Cód. 2003123 
Mod. PRO 300   Cód. 2003127 

Field strength meter 

Mod. MediaMAX MINI

 

 

 

 

Wide band amplifier 47-862MHz 

Mod. AMP 310 P     

Cód. 2003520 

Terrestrial antenna 

 

 

Installation where we get a bad signal and high 
error rates in the output of the antenna. This 
signal is injected in the headend formed by 6 TFF 
310 CI regenerators which will allow regenerating 
and/or filtering the signal of 6 multiplex, so later 
we can amplify them through and AMP 310 P and 
distribute them through the installation. The 
distributed channel will need a terrestrial digital 
receiver in order to be decoded. 
In order to distribute the encoded channels freely 
you have to install the subscriber card 
in the Common Interface slot. 

Weak signal 

Filtered and 

Regenerated 

signal 

Summary of Contents for TFF 310 CI

























Reviews: