Fronius T.I.M.E. SYNERGIC, Operating Instructions/Spare Parts List

Page: 36 / 91

36
Fig.10 TR 34 T.I.M.E. remote-control unit
TR 34 T.I.M.E. REMOTE-CONTROL UNIT
For the Standard/Program, Pulsed-Arc/Program and Standard/Manual weld-
ing modes, a TR 34 T.I.M.E. remote-control unit is needed.
N.B.! Controls on the remote-control unit always take priority over the power
source, i.e. they dictate how the machine is to function.
Welding power dial
Arc-length correction dial
- red scale ... for continuous correction of the pre-set arc-length within
a +/- 20% range, in Pulsed-Arc and Standard/Program modes
- black scale ... for continuous adjustment of the welding voltage within
a 0 - 50 V range in Standard/Manual mode (‘No Program’ indicator
lights up)
Operating mode switch ... for pre-selecting the required operating mode
in MIG/MAG welding
Droplet detachment / arc-force correction dial
- red scale ... stepless correction facility for droplet-detachment energy
left ... decreased droplet-detachment force
neutral ... neutral droplet-detachment force
right ... increased droplet-detachment force
- black scale ... for influencing the short-circuit force at the instant of
droplet transfer
left ... harder and more stable arc
neutral ... neutral arc
right ... soft, low-spatter arc
Connection socket for remote-control cable
FK 71 COOLING UNIT
Fig.8 FK 71 cooling unit
Fig.9 Rear of FK 71 cooling unit
Cooling-unit supply-lead plug
Coolant draining device
Plug-type connection for water forward flow (blue)
Plug-type connection for water return flow (red)