Fronius Robacta Reamer X-Line J, Operating Instructions Manual

Page: 4 / 76

Adjusting the gas nozzle clamping device 34
Fitting the Cleaning Cutter 35
Fitting the cleaning cutter 35
Adjusting the Position of the Cleaning Motor 36
Adjusting the position of the cleaning motor 36
Setting up the Compressed Air Supply 37
Setting up the cleaning device compressed air supply, compressed air relief valve function 37
Starting Up the Parting Agent Atomizer 38
Filling the parting agent container (1 liter) and connecting it to the cleaning device 38
Connecting the parting agent container (10 liter) to the cleaning device 39
Setting the injection quantity of the parting agent atomizer 40
Starting up the fill-level control sensor 41
General 41
Operating controls and displays on the sensor 41
Performing empty adjustment 41
Performing a full adjustment 42
Unlocking/locking the fill-level control sensor 42
Manually Checking the Cleaning Device Functions 43
Safety 43
Manually checking the cleaning device functions 43
Start up the Cleaning Device 45
Requirements for Start-up Operation 45
Start-up Operation 45
Cleaning Program Sequence 46
Safety 46
Cleaning Program Sequence 47
Cleaning Device Signal Sequences 51
Cleaning device signal sequences 51
Wire Cutter Signal Sequence 52
Wire cutter signal sequence 52
Service, maintenance and disposal 53
Safety 55
Safety 55
Ensuring that the cleaning device is depressurized 56
Service, maintenance and disposal 57
General 57
Before every start-up 57
Daily 57
Weekly 57
Every 6 months 57
Whenever required 57
Disposal 58
Troubleshooting 59
Safety 61
Safety 61
Ensuring that the cleaning device is depressurized 62
Troubleshooting 63
Errors in the Program Sequence 63
Technical data 65
Technical data 67
Robacta Reamer X-Line J, Robacta Reamer X-Line J Alu 67
Appendix 69
Circuit Diagram for Robacta Reamer X-Line J, Robacta Reamer X-Line J Alu 70
Pneumatic Plan for Robacta Reamer X-Line J, Robacta Reamer X-Line J Alu 71
Declaration of conformity 72
4