Fronius Robacta Reamer X-Line J, Operating Instructions Manual

Page: 45 / 76

Start up the Cleaning Device
Requirements for
Start-up Opera-
tion The following requirements must be met in order to start up the cleaning device:
-
Cleaning device work stand screwed tightly to the surface
- Cleaning device screwed tightly to the work stand
- Gas nozzle clamping device set - not when using a gas nozzle with an outside dia-
meter of 25 mm (0.98 inches). For more info, see the “Adjusting the Gas Nozzle
Clamping Device” chapter
- Cleaning cutter fitted
- Position of the cleaning motor set
- Parting agent atomizer started up
- Compressed air supply set up
- Functions manually checked
- Cleaning device connected to the robot control
- All covers installed and all safety devices in good order and installed in the location
intended
Start-up Opera-
tion An active signal from the robot control starts up the cleaning device.
45
EN-US