Fronius Robacta Reamer X-Line J, Operating Instructions Manual

Page: 35 / 76

Fitting the Cleaning Cutter
Fitting the clean-
ing cutter
CAUTION!
Burning hazard due to hot cleaning cutter as a result of operation.
This can result in severe burns.
▶
Before handling the cleaning cutter, allow it to cool to room temperature (+25°C,
+77°F).
CAUTION!
Danger from incompatible wearing parts.
This can result in damage to property and malfunctions.
▶
Only use the device manufacturer's contact tips, gas nozzles and cleaning cutters.
No liability is accepted for damage caused by the use of contact tips, gas nozzles or
cleaning cutters from third-party manufacturers.
The cleaning cutter is not part of the scope of supply. Find the right cleaning cutter in the
manufacturer’s Spare Parts List.
1
Remove the protective cover from the cleaning device
2
1
2
3
Mount the protective cover on the cleaning device so that it is in its original position
once again
35
EN-US