Fronius Robacta Reamer X-Line J, Operating Instructions Manual

Page: 3 / 76

Table of contents
Safety Instructions 5
Explanation of Safety Instructions 5
General 5
Intended Use 6
Environmental Conditions 6
Obligations of the Operating Company 6
Obligations of Personnel 6
Particular Hazard Areas 6
Personal Protection and Protection of Others 7
EMC Device Classifications 7
EMC Measures 8
EMF measures 8
Safety Measures at the Setup Location and during Transport 8
Safety Measures in Normal Operation 9
Maintenance and repair 9
Safety Inspection 9
Disposal 10
Safety Symbols 10
Copyright 10
General 11
General 13
Principle 13
Functionality of the cleaning device 13
Applications 13
Warning Notices on the Cleaning Device 13
Transport 16
Transport equipment 16
Transport Instructions on the packaging 16
Scope of Supply 17
Scope of Supply 17
Operating controls, connections and mechanical components 19
Safety 21
Safety 21
Operating controls, connections and mechanical components 22
Operating Controls, Connections, and Mechanical Components - Front of Device 22
Operating Controls, Connections, and Mechanical Components - Rear of Device 23
Operating Controls, Connections, and Mechanical Components - Side of Device 24
Connections for robot control 24
Installation and Startup 25
Safety 27
Safety 27
Ensuring that the cleaning device is depressurized 28
Before installation 29
Intended Use 29
Operating personnel, maintenance personnel 29
Setup regulations 29
Specifications for the Compressed Air Supply 29
Measures to ensure safe operation of the device when operating personnel are untrained 30
Diagram of the programmable logic control (PLC) 31
Diagram of the programmable logic control (PLC) 31
Screwing the Cleaning Device to the Solid Surface 32
Screwing the cleaning device and work stand to the surface 32
Welding Torch Cleaning Position 33
Welding Torch Cleaning Position 33
Adjusting the Gas Nozzle Clamping Device 34
3
EN-US