Fronius Robacta Reamer X-Line J, Operating Instructions Manual

Page: 37 / 76

Setting up the Compressed Air Supply
Setting up the
cleaning device
compressed air
supply, com-
pressed air relief
valve function Set up the compressed air supply:
1
Disconnect the compressed air supply to the cleaning device and ensure that this
compressed air supply remains disconnected while the tasks described below are
being carried out on the device
2
Screw the supplied compressed air relief valve on to the compressed air connection
on the cleaning device
3
Connect the compressed air supply to the compressed air relief valve
You can interrupt and restore the compressed air supply to the cleaning device by mov-
ing the compressed air relief valve back and forth - see description below.
The following illustration shows the compressed air relief valve closed = compressed air
supply to the device interrupted:
Compressed air relief valve closed
The following illustration shows the compressed air relief valve open = device is being
supplied with compressed air:
Compressed air relief valve open
37
EN-US