Fronius LaserHybrid MHP 360i LH, Operating Instructions Manual

Page: 89 / 112

89
EN-US
Set up focus in y direction:
Using the Allen screw threaded pins
(2), set up the laser optics in the y di-
rection
size 2.5 mm
The installed springs take care of the +/
- movement.
Screw the Allen screw threaded pins
(1) and (3) tight
size 2.5 mm
Tighten 4 x Allen screws
size 4 mm
Tightening torque = 3.8 Nm
(1)
(2)
(3)
6
7
Set up focus in positive x direction:
Loosen Allen screw threaded pins (1)
by two turns
Using the Allen screw threaded pins
(3), set up the laser optics in the pos-
itive x-direction
size 2.5 mm
Screw the Allen screw threaded pins
(1) tight
size 2.5 mm
Set up focus in negative x direction:
Loosen Allen screw threaded pins (3)
by two turns
Using the Allen screw threaded pins
(1), set up the laser optics in the neg-
ative x-direction
size 2.5 mm
Screw the Allen screw threaded pins
(3) tight
size 2.5 mm
8
9
10
11
12
13
10
10
10
10
1