Fronius LaserHybrid MHP 360i LH, Operating Instructions Manual

Page: 20 / 112

20
Scope of Supply The following components are included as standard with the laser welding head:
-
1 x WF 25i LaserHybrid 10 kW laser welding head (complete)
- 1 x LaserHybrid hosepack
- 1 x stick out gauge
- 1 x flow volume meter (max. 25 l/min)
- 1 x Operating Instructions
- Tool and wirefeed end accessories, depending on the configuration
Tool and Wirefeeder Accessories:
Optional Compo-
nents Possible laser optics:
-
Trumpf BEO D70
- Precitec YW52
- Highyag BIMO
The following components are optional for the WF 25i LaserHybrid 10 kW laser welding
head:
-
Focus monitoring
- Temperature sensor
- Pressure sensor crossjet
- Extraction hose set
- Mounting plate 17.5 mm
- Gas nozzle crossjet
Description No.
Extractor tool for register pins
44,0450,1223 1
Gauge for adjusting the focal spot
42,0201,1216 1
Stick out gauge
42,0201,1742 1
Allen key, size 6 mm (for adjusting the position on the holder unit)
42,0435,0001 1
Allen key, size 5 mm (for adjusting the position on the holder unit)
42,0410,0014 1
Allen key, size 4 mm (for adjusting the position on the holder unit)
42,0410,0013 1
Allen key, size 3 mm (for fixing the extraction hose)
42,0410,0012 1
Allen key, size 2.5 mm (for adjusting the laser optics)
42,0435,0002 1
Trimming aid for inner liners
42,0001,4936 1
Spanner for welding torch coupling and hosepack coupling
45,0200,1404 1
Flat spanner, wrench size 12 mm
42,0410,0007 1
Flat spanner, wrench size 8/10 mm
42,0410,0004 1
Drive wheel key
42,0200,9344 1