Fronius LaserHybrid MHP 360i LH, Operating Instructions Manual

Page: 10 / 112

10
Intended Use The LaserHybrid head is to be used exclusively for its intended purpose.
The LaserHybrid head is intended exclusively for LaserHybrid welding of aluminum, CrNi
and steel materials.
Any other use does not constitute proper use.
The manufacturer is not responsible for any damage resulting from improper use.
Proper use also means:
-
Completely reading and obeying all instructions in the Operating Instructions
- Completely reading and obeying all safety instructions and danger notices
- Carrying out all the specified inspection and servicing work.
Never use the LaserHybrid head or the power source to thaw pipes.
The LaserHybrid head is designed for operation in industry and business. The manufac-
turer shall not be liable for any damage resulting from use in a living area.
The manufacturer shall not be liable for faulty or incorrect work results either.
Environmental
Conditions Operation or storage of the LaserHybrid head outside the stipulated area will be deemed
as not in accordance with the intended purpose. The manufacturer is not responsible for
any damage resulting from improper use.
Temperature range of the ambient air:
-
During operation: -10°C to +40°C (14°F to 104°F)
- During transport and storage: -25°C to +55°C (-13°F to 131°F)
Relative humidity:
-
Up to 50% at 40°C (104°F)
- Up to 90% at 20°C (68°F)
Ambient air: free of dust, acids, corrosive gases or substances, etc.
Altitude above sea level: up to 2000 m (6561 ft. 8.16 in.)
Obligations of the
Operating Com-
pany The operating company must only allow persons to work with the LaserHybrid head if they
-
are familiar with the basic occupational safety and accident prevention regulations and
are trained in handling the LaserHybrid head
- have read and understood these Operating Instructions, especially the section "Safety
Rules," and have confirmed this with their signature
- are trained according to the requirements for the work results.
The safety-conscious work of the personnel must be checked regularly.
Obligations of
Personnel All persons who are assigned to work with the LaserHybrid head must do the following be-
fore beginning work:
-
Follow the basic regulations for occupational safety and accident prevention
- Read these Operating Instructions, especially the section "Safety Rules," and confirm
that they have understood and will follow them by signing
Before leaving the workplace, ensure that no personal injury or property damage can occur
in one's absence.
Personal Protec-
tive Equipment Please take the following precautions for your own personal safety: