Fronius DeltaSpot G2, Operating Instructions And Spare Parts List

Page: 37 / 68

37
EN
Before commissioning
General
WARNING!
Machines that start up automatically can cause serious injury and damage.
In addition to these operating instructions, the safety rules issued by the manufacturer of
the robot and welding systems must also be observed. For your personal safety, ensure
that all protective measures have been taken and will remain in place for the duration of
your stay within the working area of the robot.
Measures for the
safe operation of
the device with
untrained person-
nel If untrained operators have access to the device, it must be shut down in accordance with
'Performance Level d' of the ISO 13849-1 standard while the untrained operators are in its
vicinity.
Proper use If untrained operating personnel have access to the device, measures must be implement-
ed to ensure that the entire system is switched off for the duration of the work in this area
and that it is prevented from starting up again accidentally as the result, for example, of a
control fault.
The spot welding gun is designed exclusively for resistance welding. Any use above and
beyond this purpose is deemed improper. The manufacturer shall not be liable for any
damage resulting from such improper use.
Proper use also includes:
-
complying with all the instructions in the operating instructions
- carrying out all the specified inspection and servicing work (see "Care, maintenance
and disposal")
Setup regulations
WARNING!
If one of these devices falls or topples over, it could cause serious or even fatal in-
jury.
Make sure that all components are installed and secured correctly.
NOTE!
The installation of resistance welding system components is the responsibility of
the system builder.
Ensure that
► all connections are connected properly
► all screw fastenings are securely fixed
The manufacturer shall not be liable for any damage caused as a result of incorrect assem-
bly of the welding gun.